De-Registering A Portable Part; Automatic Enabling - Siemens M105 Operating Instructions Manual



De-registering a portable part

Automatic enabling

Enter the PIN and click
The portable part now searches for the base station and automatically
registers at it.
If registration is not possible (base station not in registration mode or not
powered, incorrect PIN), the system will indicate the necessary steps for
resolving this problem.
Select the adapter in the window and click Unregister.
The automatic enabling feature is not available with Gigaset3070/75isdn.
The data connection is automatically enabled as soon as usage stops.
"Permit automatic
The
the data connection manually. If the V.24 interface is not used for a set
length of time (no activity on the V.24 interface and control line DTR = 0),
then this is automatically enabled and can be automatically seized by an-
other portable part. See "Remote adapter" tab on page 18.
If you permit automatic enabling, you must also define an enabling time.
A
Configuration program options
OK .
enabling:" feature eliminates the need to enable
Back
17