Table of Contents
Advertisement
Full Selection of Interfaces
External interfaces are essential for image processing
devices of the future. The PV310 is equipped with a full
selection of interfaces that rival even large-scale devices.
Ethernet Connection
• The PV310 can be connected to a LAN using high-speed Ethernet
(100BASE-TX) to meet various application requirements.
• Captured images and measurement data can be transmitted to a PC at
high speed even during operation.
• The inspection status of multiple PV310 units can be monitored from a
single PC.
• With the high-speed connection to a PC, backing up image data is also
easy.
Operation Keypad
The dedicated keypad with an
ergonomic structure provides
excellent operability.
PLC Link Function
• The PV310 can communicate easily with external
devices, such as PLCs, using the RS232C port.
• The PV310 can be connected to other companies'
PLCs without requiring additional programming. Of
course it can be connected to our PLCs, too.
Supported Models:
• Matsushita Electric Works PLCs
• OMRON Corporation - C, CV and CS1 series
• Mitsubishi Electric Corporation - A, Q and FX series
• Rockwell Automation DF1 protocol
• Fuji Electric SX series
VGA Monitor
Judgment results and program
settings are displayed in color for
outstanding visibility.
(Captured images are in black
and white.)
Note: Commercially available VGA monitors may also be connected
(devices supporting horizontal synchronous frequency: 31.466KHz
and vertical synchronous frequency: 59.94KHz only.)
Operation cannot be guaranteed with devices from other manufacturers.
6
PC
External Memory (CF Card) Support
•
In RUN
• Can save captured images.
[Storage capacity:
Approx. 2,000 images (512 MB)]
• Saves inspection results.
Facilitates trend tracking and data
analyses.
•
In the setting mode:
• Backs up setting data and image data
captured by the unit.
Note: Backup image data can be used as
regular bitmap files on a PC.
DIN Rail Installation
Connection of up to Two
Up to two identical cameras can be
connected. The following camera types
are available.
Connection of up to Four Cameras
by a Camera Switching Unit
Up to four identical standard or double-speed random cameras can be
connected using a camera switching unit (option: ANPV3700).
* Excluding Ultra-compact camera
This connection is ideal for:
• Control of different inspections by a single controller unit
• Inspection of wide areas, and positioning of workpieces during the LCD
lamination process, etc.
Camera switching unit
(ANPV3700)
PV310
•
Camera Switching Mode
Images taken by either of two cameras
connected to the camera switching unit
are output to the PV310.
* Available for ANM832 (CE) and
ANM831
mode:
Identical Cameras
Standard camera
[ANM832 (CE)]
Double-speed random
camera [ANM831]
Ultra-compact camera
[ANPVCA1012]
PV310
Two cameras
Cameras
•
Camera Image Split Mode
(top/bottom split and left/right split)
Half images taken by two cameras are
combined into one, which is then
output to the PV310.
* Available for ANM832 (CE) only
Advertisement
Table of Contents
