Panasonic KX-HDV430 Operating Instructions Manual page 57

– To select a number from the phone book: Tap
– To select a number from the call history: Tap
R Stream
Select "Stream 1" or "Stream 2" if the Network Camera is configured to output multiple streams.
For details, refer to your Network Camera's documentation.
Network Camera Viewer
Starting Network Camera Viewer
[In standby mode]
1. Tap / . a "Network Camera"
Note
R The video feed of the Network Camera to which you most recently connected is displayed.
R No video feed is displayed if no Network Cameras have been registered.
Closing Network Camera viewer
1. Press "Home" or "Cancel". a "OK"
Selecting a Network Camera
[In standby mode]
1. Tap / . a "Network Camera"
2. Press /[MENU].
3. Tap "Camera Selection".
4. Tap / : Select the desired camera name. a "OK"
Controlling a Network Camera
[While displaying a video feed from a Network Camera (operation screen)]
Centering: While the status bar and operation area are displayed on the screen, tap the spot where you
want to center the video feed.
Tap the screen to display the icons before performing the following operations.
Pan: Tap / .
Tilt: Tap / .
Zoom in: Tap .
Zoom out: Tap .
Home position: Tap
*1 Depending on the Network Camera, this feature may not be available.
Note
R If an icon is grayed out, that feature is not available.
Switching Automatically among Multiple Network Cameras
You can automatically cycle through the video feeds from registered Network Cameras at a set time
interval.
[While displaying a video feed from a Network Camera (operation screen)]
1. Press /[MENU].
2. Tap "Camera Selection".
3. Tap "Sequential".
*1
.
.
.
Network Camera
57