1 Important Safety Instructions
Do not install in damp locations
or locations subject to vibrations.
Damage to the system can result.
Do not install near sources of
noise.
Malfunctions can result.
Elevators, automatic doors,
industrial machinery, etc.
Avoid installation in the
following locations:
•
Near beaches or other places
with a large amount of salt
•
Hot springs or other locations
subject to sulfuric gas
•
Locations subject to water
and oil (including industrial
lubricants) sprays and high
humidity
•
Locations with large changes
in voltage
•
Near machines generating
electromagnetic waves
•
Locations close to organic
solvents
Do not use heaters near the
Centralized Control System.
The Centralized Control System
may malfunction because the
temperature becomes outside
the range of the operating
temperature for the system.
Caution
Do not install under direct sunlight
or in places near heat sources.
Avoid static electricity during
cabling work.
Keep televisions, radios, PCs,
etc, at least 1 m away from the
Centralized Control System, indoor
units, and remote controllers.
Use remote controllers or
system controllers together.
4
Damage to the system can result.
Before starting cabling work,
touch ground to discharge static
electricity from the body.
Picture breakup and noise can
occur.
Should the Centralized Control
System fail, operation of air
conditioners is disabled with
the Centralized Control System.
Be sure to use the remote
controllers or system controllers
together.