Panasonic KX-TDA100 User Manual page 36

Hybrid ip-pbx ad wireless pt
Hide thumbs Also See for KX-TDA100:
Table of Contents

Advertisement

Troubleshooting and Error Messages
Problem
Even when in standby mode, you
cannot access the Phonebook or
other menus.
(
is displayed in standby
mode.)
Noise is frequently heard.
Two short beeps are heard
during a conversation.
The charge indicator flashes red
rapidly.
You charged the battery for 7
hours, but the beep tones sound
every 5 seconds and
to be charged) flashes after a few
telephone calls.
The battery indicator does not
display the remaining charge
properly after you replace the
battery.
While operating the unit, the AC
adaptor feels warm. While
charging the battery, the handset
feels warm.
36
• The BGM setting may be on.
→ Press
→ Set the handset and base unit away from other electrical
appliances.
→ Move closer to the base unit.
• The radio signal is weak.
→ Move closer to the base unit.
• The charger is not connected properly.
→ Make sure the battery is inserted properly.
→ Set the handset in the charger properly.
• The battery charge contacts may be dirty.
→ Clean the battery charge contacts without damaging them
and charge once more.
(needs
• It is time to change the battery.
→ Replace with a new one.
→ Charge the battery for about 7 hours when the low battery
warning is displayed.
• These are normal conditions.
Description and Solution
then
7
5
1
, and press
.
0

Advertisement

Table of Contents
loading

Table of Contents