1) Remove the 4 screws securing the MD Base (bracket).
2) Disconnect the Harness cable from the FRONT PCB.
3) Remove the MD Base Assembly.
1) Remove the 4 screws securing the MD Base (bracket).
2) Remove the MD Assembly.
3) Disconnect the FFC cable from the Bluetooth Module.
4) Remove the Bluetooth Module.
5) Disconnect the Harness cable from the Wi-Fi Module.
6) Remove the Wi-Fi Module.
7) Remove the 2 screws securing the FRONT PCB.
8) Remove the FRONT PCB.
2
1
3
1
Fig. 8
3
B/T
4
8
7
FRONT
MD Assembly
2
1
Fig. 9
3-6
1
1
Wi-Fi
6
5
1