Mounting on Concrete or Mortar Wall
CAUTION
Drive mounting screws into the wall. Be careful to avoid touching any metal laths, wire laths or metal
plates in the wall.
1.
Place the reference for wall mounting (on the following page) on the wall to mark the 2 screw positions.
2.
Install two anchor plugs (user-supplied) in the wall.
Hammer
Anchor Plug
29 mm
3.
Install the screws (included) in the wall.
Drive the screw
to this position.
4.
Hook the AC adaptor on the screw heads.
Note
Be careful not to drop the AC adaptor.
110 mm
6.4 mm
2.2 Installation of the Hybrid IP-PBX
Installation Manual
49