Sony PLAYSTATION VR Instruction Manual page 7

does not operate properly, contact the appropriate PlayStation®
customer service helpline which can be found within the
guarantee section.
Unusual or unresponsive behaviour
Press the (power) button (
inline remote for at least 7 seconds to force a shutdown, and
then turn on the headset again. If the problem persists, restart
the PS4™ system.
High temperature message
ˎ If the processor unit's internal temperature becomes
elevated, a message will be displayed. In this case, turn off
the PS4™ system and leave it unused for a while. After the
processor unit cools down, move it to a location with good
ventilation, and then resume use.
ˎ Do not block the processor unit's vents, and do not use the
product in a closed cabinet or other locations where heat
may build up.
AC adaptor and AC power cord use
ˎ Use an electricity supply that is easily accessible, so the AC
power cord can be unplugged quickly if the need arises.
Stop use, unplug the AC power cord from the electricity
supply and disconnect any other cables immediately if the
product functions in an abnormal manner, produces
unusual sounds or smells or becomes too hot to touch.
ˎ Unplug the AC power cord from the electricity supply when
the status indicator on the processor unit is red. Unplugging
the cord while the indicator is white or flashing red may
cause a malfunction.
page 11) on the VR headset's
ˎ Do not use an AC adaptor or AC power cord other than
those supplied with the product. The supplied AC adaptor
and AC power cord are designed exclusively for use with
this product. They cannot be used with other products. In
addition, other AC adaptors or AC power cords cannot be
used with this product. Failure to follow these precautions
may cause the product to overheat and may lead to fire or
electric shock.
ˋ Do not plug the AC power cord for the product into an
electricity supply until you have connected the
HDMI™cables.
ˋ Do not touch the plug of the AC power cord with wet
hands.
ˋ Do not use the AC adaptor when it is covered by a cloth.
Heat could be trapped causing fire or malfunction.
ˋ Unplug the AC power cord from the electricity supply
before cleaning or when you do not intend to use the
product for an extended period of time.
ˋ Do not connect the AC power cord to a voltage
transformer or inverter.
Storage conditions
ˎ Do not expose the product or accessories to high
temperatures, high humidity or direct sunlight.
ˎ Do not heat the product with kitchen or heating equipment
such as a dryer. It may lead to fire, injury or malfunction.
ˎ Do not place the product or accessories on surfaces that are
unstable, tilted or subject to vibration.
EN
7