Ais-Plug Set (2Cr-A4890-70) - Yamaha YZF-R1 Kit Manual

15. AIS-plug Set (2CR-A4890-70)
This plug set is used when the AIS (Air
Induction System), an exhaust gas purifying
system, is removed.
Parts List
No. PART No.
1 5SL-1482L-70
2 2CR-11159-70
3 90336-10020
Installation
1. Remove the hose attached to the cylinder
head cover and the air cut- of f valve
accompanying the hose.
2. Remove the cap fitted to the hose, remove
the reed valve and plate from inside.
3. Install the PLATE,2 (5SL-1482L-70) in
1
replacement of the cap. Be sure to apply
liquid gasket.
STD STD
KIT
PART NAME
PLATE, 2
PLUG, BLIND
PLUG, TAPER
4. Remove the cylinder head cover and the four
5. After removing the hose connected to
A
B
B
B-B
A
2
– 32 –
Q'TY
2
4
1
collars fitted to the head cover, and install
the PLUG, BLIND (2CR-A4890-70).
2
the air filter casing form the air-cut valve
assembly, insert the
(90336-10020) onto the side of the air
filter casing to close the opening.
A
3
A
REMARKS
PLUG, TAPER
3
1
1