Page 1
DP2010, DP2011 Description High Speed Drills 6.5mm (1/4") ONCEPT AND MAIN APPLICATIONS Models DP2010 and DP2011 have been developed as successor models of 6.5mm (1/4”) high speed drills 6501 and 6501X. The above image Their main features are: is Model DP2010.
1R291 Retaining ring S and R pliers removing / mounting Retaining S-10 [2] LUBRICATION Apply Makita grease N. No.2 to the following portions designated with the black triangle to protect parts and product from unusual abrasion. Item No. Description Portion to lubricate...
P 3 / 9 epair [3] DISASSEMBLY/ASSEMBLY [3] -1. Drill Chuck DISASSEMBLING (1) Remove Drill chuck as drawn in Fig. 2. Fig. 2 1. Fix Wrench 10 to Vise. 2. Insert 1R231 into Drill chuck and set Drill chuck to Wrench 10. Wrench 10 Drill chuck 1R231...
Page 4
P 4 / 9 epair [3] DISASSEMBLY/ASSEMBLY [3] -2. Spindle section DISASSEMBLING (1) Remove Drill chuck as drawn in Fig. 2. (2) Separate Housing set (R) from Housing set (L) and take out Spindle section as drawn in Fig. 3. Fig.
Page 5
P 5 / 9 epair [3] DISASSEMBLY/ASSEMBLY [3] -2. Spindle section (cont.) ASSEMBLING (1) Assemble Ball bearing 6900LLB to Spindle and secure the bearing with Retaining ring S-10. Refer to the drawings on the bottom of Fig. 4. (2) Assemble Helical gear 34 as drawn in Fig. 5. Fig.
Page 6
P 6 / 9 epair [3] DISASSEMBLY/ASSEMBLY [3] -3. Armature (cont.) DISASSEMBLING (3) Remove Ball bearings as drawn in Fig. 7. Fig. 7 1. Use Water pump pliers to secure the claws of 1R269 firmly so that 1R269 cannot be opened. And remove Ball bearing 607DDW with 1R269.
P 7 / 9 ircuit diagram Fig. D-1 Color index of lead wires' sheath Black Choke coil White Brush holder Orange Purple Field (viewed from Commutator side) Choke coils are not used in some countries. Brush holder Choke coil Reverse Reverse Switch Switch...
P 8 / 9 iring diagram Fig. D-2 Wiring of Field Lead Wires ( Under Brush holder of Switch side) Rib A Field lead wires should be tightened between Field, Ribs A and B. Rib B Route five Field lead wires (purple, white, red, 2 blacks) between Ribs A and B.
Page 9
P 9 / 9 iring diagram Fig. D-4 Wiring in Housing set (L) Route Choke coil’s lead wires (purple) Fix Choke coil’s lead wires (purple) between Rib E and the inner wall. in Lead wire holder. Choke coil with Lead wire (purple) Rib E Put Choke coil with Lead Do not put any Lead...