Configuring An Ip Phone On Web - Huawei espace 7810 Administrator's Manual

Huawei IP Phone eSpace
7810&7820&7830&7850&7870&7803X
Administrator Guide
3.
4.
5.
6.
7.
8.
9.
10. Set Subnet Mask, Default Gateway, Pri DNS, and Sec. DNS, and click Save.
11. Press Back to return to the Network page.
12. Press Back.
2.1.2 Configuring an IP Phone on Web Pages
Open the Internet Explorer, enter the IP address of an IP phone in the address box, and set
parameters for the IP phone on the web configuration page that is displayed.
The web configuration page consists of the following tabs:
Issue 01 (2011-12-31)
For eSpace 7870, press 6 to access the Setting Type page.
Press 2.
The Please enter Password page is displayed.
Enter the password (the initial password is admin).
Press Confirm.
The Advanced Settings page is displayed.
Press 2.
The Network page is displayed.
Press 1.
The WAN Port Option page is displayed.
Press 2.
The Static IP Client page is displayed.
Press the up arrow key or down arrow key to select IP, press Del to delete the default IP
address, and enter the required IP address.
For eSpace 7810, press X to delete the default IP address.
The WAN Port Option page is displayed.
For eSpace 7810, press OK to save settings.
For eSpace 7810, press MENU to return to the Network page.
The following messages are displayed:
Network updating
Please wait...
The settings take effect after the IP phone is restarted.
For eSpace 7810 and 7820, the following messages are displayed:
Network updating
Please wait...
Then the following messages are displayed:
Initializing
Please wait...
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Single IP Phone Configuration
5