Internet Connection Setup Wizard - D-Link DCS-2630L User Manual

Section 3 - Configuration
This wizard will guide you through a step-by-step process to configure your new D-Link
Camera and connect the camera to the Internet.
Click Next to continue.
Select how the camera will connect to the Internet. If you are unsure how your camera will
connect to the Internet, select Automatic IP. If your ISP has assigned you a static IP, select
Static IP Address and enter the following details:
IP Address: Enter the IP address that the camera will use on your network. You may
need to get this information from your ISP or network administrator.
Subnet Mask: The default value is "255.255.255.0. " Used to determine if the destination
is part of the same network segment.
Default The gateway used to forward data to destinations in a different subnet.
Gateway Invalid gateway settings may cause the failure of transmissions to a
(Router): different subnet.
Optional Primary domain name server that translates names to IP addresses.
Primary DNS:
Optional Secondary domain name server to backup the Primary DNS.
Secondary
DNS:
Click Next to continue.
D-Link DCS-2630L User Manual

Internet Connection Setup Wizard

21