Detailed Settings Function - Panasonic CZ-RTC4 Service Manual

5. Detailed Settings Function

• This allows the system address, indoor unit address, and other settings to be made for the individual or
group-control indoor unit to which the remote controller used for detailed settings is connected.
When detailed settings mode is engaged, operation stops at the individual or group-control indoor unit where the
remote controller used for detailed settings is connected. Simple settings items can also be set at this time.
1 Press and hold the
simultaneously for 4 seconds or longer.
2 " ", unit No. "
1
settings data "
remote controller LCD display (Fig. 5). At this time,
the indoor unit fan begins operating.
3 If group control is in effect, press the
select the address (unit No.) of the indoor unit to set.
At this time, the fan at the indoor unit begins operating.
*If unit No. "
will be made for all indoor units.
4 Press the temperature setting
select the item code to change.
5 Press the timer time
desired setting data.
*For item codes and setting data, refer to the
following page.
6 Press the
and remains lit, and setting is completed.)
7 Press the
controller display.
, and buttons
", item code "
" are displayed blinking on the
" is displayed, the same setting
/ buttons to
/ buttons to select the
button. (The display stops blinking
button to return to normal remote
," and
4
5
button and
1 - 8
Optional Controller
Remote Controller Functions
°
°
A
CZ-RTC4
7 1 6
Fig. 5
2
3