Lcd Monitor Settings - Panasonic AG-HPG10P Operating Instructions Manual

Basic operations (continued)

LCD monitor settings

1
Hold down [POWER] for at least 2 seconds
to turn the power on.
First check that an image is displayed on the
LCD monitor, and then adjust the angle of the
monitor to the position where it is easiest to see
its displays.
2
Press [MODE] to display the thumbnail
display off screen.
3
Press [MENU].
Basic operations on the setting menus. (page
70)
4
Using [STOP] and [PLAY] select "YES" for
the "LCD SET" item on the setting menu
"DISPLAY SETUP" screen.
DISPLAY SETUP
VIDEO OUT OSD
DATE/TIME
LEVEL METER
CARD/BATT
P2 CARD REMAIN
OTHER DISPLAY
LCD BACKLIGHT
LCD SET
PUSH MENU TO RETURN
5
Using [STOP] and [PLAY] , select the item to
be set.
LCD SET
LCD COLOR LEVEL
_
[ ]
LCD BRIGHTNESS
_
[ ]
LCD CONTRAST
_
[ ]
PUSH MENU TO RETURN
LCD COLOR LEVEL:
LCD BRIGHTNESS:
LCD CONTRAST:
20
OFF
OFF
ON
ON
TOTAL
PARTIAL
YES
[ + ]
[ + ]
[ + ]
This adjusts the color
density of the screen.
This adjusts the screen
brightness.
This adjusts the screen
contrast.
6
Using [FF] or [REW], adjust the selected
item.
7
Press [MENU] 3 times to release the menu
mode.
• The adjusted values can be restored to their
factory settings by pressing [RESET].