Table of Contents
Advertisement
3. To seal the end of the strap, hold it about 1/4 inch away from a candle flame
or lighter until the edge melts away.
PLEASE USE CAUTION.
2.5
Change Collar Contacts
Included with your No-Bark Collar are Collar Contacts in three different lengths
(short, medium and long) that deliver static correction to your dog.
Choose the appropriate length for your dog's hair coat. If your dog has dense
coats or undercoats, use one of the longer Collar Contacts included with your
No-Bark Collar.
IMPORTANT
Make sure that you power off the Collar Unit before replacing the Collar
Contacts (see "Powering On/Off the Collar Unit" on page 12).
Make sure that the Collar Contacts are securely fastened. Do not over tighten.
1. Using your fingers or with the help of the Collar Contacts tightening tool
(supplied with your No-Bark Collar), twist the Collar Contacts counter-
clockwise to loosen and remove them.
Collar Contacts
10
Fit the tightening tool
over the Collar Contact
and twist counter-
clockwise to loosen it.
Getting Started
Advertisement
Table of Contents
