Panasonic DP-2000 Operating Instructions Manual page 65

Duplex Unit
Check this checkbox if an optional duplex printing unit (DA-MD200) is installed. Duplex printing function is
now enabled.
Output Tray
If the Exit Tray (Inner) and the Dual-Path Exit Guide Unit (DA-XN200/FK200) are installed, select Inner
Tray option. This allows specifying Inner 1 and Inner 2 as the output tray for the printer output.
If the 1-Bin Finisher or Exit Tray (Outer) (DA-FS200/XT200) is installed, select Inner Tray option +
Finisher/Outer Tray option. This allows specifying Inner 1, Inner 2, and Outer as output tray for the printer
output. Also, the stapling function becomes available if the Inner Tray option and Finisher/Outer option
are enabled.
Number of Paper Tray
Select the number of available paper tray(s) for the printer if an optional Paper Feed Module is installed.
Printer/Fax Memory
Select the size of the Expansion Flash Memory Card or whether a Fax Option (2MB) has been installed, to
enable Security Print.
Security Print Password
Set the password for Security Print.
• Device Settings Tab specifies device-specific settings and settings of optional
NOTE
devices. Refer to operation manuals of the optional devices, or on-line manuals for
settings items.
• Settings specified in this section are saved as standard (default) settings of the printer.
Installation and Configuration (Windows 2000)
65