Measurement
Accuracy Index
The accuracy index is a number that indicates the amount of
magnification during stereo measurements. The higher the accuracy
index, the greater the magnification. The greater the magnification, the
more accurately you can place the measurement cursors allowing for
more accurate results.
When taking stereo measurements, you magnify the image, not by
zooming but by moving the optical tip as close as you can to the target.
102
Bad Example
•
Object is not fully visible on
right side.
•
Object is not well lit.
•
Object is not oriented
to allow proper cursor
placement.
Good Example
•
Object is fully visible on both
sides.
•
Object is well lit.
•
Object is oriented to allow
proper cursor placement.
XL Vu™ VideoProbe
®