Hitachi DV-PF73U Service Manual page 16

[ DV-PF33U ]
FRONT PANEL
REMOTE CONTROL
22
23
24
DISPLAY
25
26
27
28
29
REC
30
MENU
31
32
SETUP
33
34
MODE
35
SUBTITLE
TIMER
36
37
1. Disc loading tray
2. OPEN/CLOSE Button
Press to insert discs into or remove them from the tray.
3. CASSETTE COMPARTMENT
4. POWER Light
Lights up when the power is on.
5. POWER/STANDBY Button
Press to turn the power on and off.
6. CHANNEL Buttons
In VCR mode, press to change TV channels on the VCR;
press to adjust the tracking during normal or slow motion
playback; press to remove vertical jitter in a Still picture.
7. PLAY Button(VCR)
Press to begin playback.
8. STOP/EJECT Button (VCR)
EJECT Button
Press to remove the tape from the VCR.
STOP Button
Press to stop the tape motion.
9. AUDIO In Jacks
Connect audio cables coming from the audio out jacks of a
camcorder, another VCR, or an audio source here.
10. VIDEO In Jack
Connect a video cable coming from the video out jack of a
camcorder, another VCR, or a video source (laser disc
player, camcorder, etc.) here.
11. F.FWD Button (VCR)
Press to rapidly advance the tape, or view the picture rapid-
ly in forward during playback. (Forward Search).
2-8
1
STOP
21
54
SURROUND OPEN/CLOSE
AUDIO
SPEED EJECT
53
SKIP/CH.
52
1 2 3
SKIP/CH.
4 5 6
VCR/TV
51
7 8 9
SLOW
50
0 + 10
TV DVD VCR PAUSE/STEP
49
48
47
PLAY
46
STOP
TV CH TV POWER
45
44
VOL VIDEO/TV VOL
43
ENTER
TOP MENU TV CH RETURN
42
CLEAR
ZOOM SEARCH MODE
C.RESET
41
40
ANGLE REPEAT A-BREPEAT
39
38
2
OPEN/CLOSE
PLAY
19
20 18 16
12. REW Button (VCR)
Press to rewind the tape, or to view the picture rapidly in
reverse during the playback mode (Rewind Search).
13. REC/IRT Button
Press once to start a recording. Press repeatedly to start a
Instant Recording Timer.
14. REC Light
Lights up during recording.
15. TIMER Light
This light glows when the DVD/VCR is in standby mode
or off for a timer recording or during a Instant Recording
Timer. It flashes if TIMER is pressed for a timer recording,
but there is no tape in the DVD/VCR. It flashes when all
timer recordings or Instant Recording Timer are finished.
16 VCR OUTPUT Light (Green)
This light appears when the VCR output mode is selected.
You can only watch tapes when the green VCR OUTPUT
light is on. To make the green VCR OUTPUT light come
on, VCR on the remote control or OUTPUT on the front
panel.
17. OUTPUT Button
Press to select DVD mode or VCR mode.
●
You can switch the output mode either by pressing
OUTPUT on the front panel, or by pressing DVD or
VCR on the remote control. However, if you press
OUTPUT on the front panel first, you need to re-
select the corresponding mode by pressing DVD or
VCR on the remote control.
18. DVD OUTPUT Light (Green)
This light appears when the DVD output mode is selected.
You can only watch DVDs when the green DVD OUTPUT
Light is on. To make the green DVD OUTPUT light come
on, press DVD on the remote control or OUTPUT on the
front panel.
19. Display, Remote Sensor Window
20. PLAY Button (DVD)
Press to begin playback.
21. STOP Button (DVD)
Stops operation of the disc.
22. SURROUND Button
Press to activate the 3D sound.
SPEED Button
Press to select the VCR's recording speed (SP or SLP)
23. y y /I(POWER/STANDBY) Button
Press to turn the power on and off.
(As to the indication of the Operate switch,
y y /I
and " " shows electrical power stand-by.
24. Number Buttons
●
DVD mode
Press to directly select a Track (Audio CD) for playback.
●
VCR mode
Press to select TV channels on the VCR.
To select channels, enter channel numbers as a two-digit
number for the quickest results. For example, to select
channel 6, press 0 then 6.
3
LINE 2
DVD OUTPUT VCR TIMER REC REC/IRT REW F.FWD
VIDEO IN L (mono) AUDIO IN R
17 15 13 11 9
14 12 10
)
4 5
POWER/STANDBY
CHANNEL
STOP/EJECT PLAY
7
8 6
"I" shows ON