Connecting Digital Inputs/Outputs; Connecting The Power - Motorola FX9500 User Manual

2 - 6 FX9500 RFID Reader User Guide

Connecting Digital Inputs/Outputs

The FX9500 RFID Reader is equipped with a general purpose digital input/output (I/O) port that provides four
optically isolated 5-24 Vdc input signals and four open-collector output signals. The digital inputs can be used as
general purpose inputs or to trigger the RFID Reader for tag reading. These inputs can be configured to provide an
external read trigger from proximity sensors, photo switches, or other devices.
The digital outputs can be used as general purpose outputs, to indicate tag reading activity, or to indicate the RFID
Reader is transmitting (RF On). The outputs can also be configured to trigger conveyor gates or other access
control and sorting devices. For detailed information on configuring the digital inputs and outputs, see
Configuring Digital Inputs and
Digital Input/Output
Figure 2-3

Connecting the Power

Connect the 24 Vdc power supply to the RFID Reader and connect the power supply to your 100-240 Vac, 50-60
Hz power source. Allow 30 seconds for the RFID Reader to initialize.
Outputs.
Chapter 5,