Sending Messages; Status - Kenwood KDS-100 Instruction Manual

[↑PAGE] (key 3) allows you to scroll up the screen, 1 complete screen at a time.
Press and hold this key for approximately 1 second to move the display to the
beginning of the list.
[RETURN] (key 5) allows you to return to the first screen list.
S M
ENDING ESSAGES
You can respond to messages by pressing [RESPOND] (key 1). You will be
given the option to send a [STATUS] (key 1) or a [SELCALL] (key 2).
Note: If your dealer does not set up the Function Program key, [RESPOND] will not appear until you
press a key from 1 ~ 5.
S
TATUS
When selecting a status, a list appears with preset messages. Scroll through
the list using the
If you are making a status call in response to a message, you already have a
selected recipient. However, if you are making a new message, you must also
select a recipient by pressing [TO] (key 4). Use the
your desired recipient from the list in your terminal.
Once you have selected a status message and recipient, press [SEND]
(key 1). A message will appear on the display, confirming that you are
sending the data. If there is no response from the recipient, you are given an
option to [RETRY] (key 1) or [CANCEL] (key 5).
and keys to select your desired status.
and keys to select
7