Page 2
Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.
Page 3
Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.
I n t r o d u c t i o n Introduction With the Nokia Bluetooth Headset BH-902 you can make and receive calls while on the move and use your mobile device hands free. You can use the headset with compatible devices that support Bluetooth wireless technology.
The headset is intended for use with the AC-3, AC-4, AC-5, and DC-4 chargers. Warning: Use only chargers approved by Nokia for use with this particular enhancement. The use of any other types may invalidate any approval or warranty and may be dangerous.
■ Switch on or off To switch on, press and hold the power key until the headset beeps and the Nokia logo is displayed. If the headset has been paired with a device, it tries to connect to it. If the...
3. Activate the Bluetooth feature on the mobile device, and set the device to search for Bluetooth devices. 4. Select the headset (Nokia BH-902) from the list of found devices on your device. 5. Enter the passcode 0000 to pair and connect the headset to your device.
G e t s t a r t e d In your device, you may be able to allow the headset to connect to it automatically when the headset is switched on. To do this in Nokia devices, change your paired device settings in the Bluetooth menu. ■ Display When the headset is on and it is not used for about 10 seconds, the display enters the power saving mode.
Page 16
The microphone is muted (during a call). There are unread text or multimedia messages in your mobile device. The icon is shown only when the headset is connected to a compatible Nokia device. The battery is fully charged. The battery charge is low.
Page 18
B a s i c u s e To use the headset on the left ear, rotate the earloop so that the loop is to the left of the Nokia logo (3). To use the headset without the earloop, detach the earloop by gently pulling it from the small opening at the back of the headset, and plug the headset into your ear.
Page 24
Language. Scroll to the desired language, and press the answer/end key twice. The language is updated from the connected Nokia device if the device provides the language setting. To set the display brightness, select Brightness. Scroll to the desired level, and press the answer/end key.
Recharge your battery only with Nokia approved chargers designated for this device. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime.