Step 2: Preparing for
Network Connection
Wired Setup
Use a LAN cable to connect to the LAN (100)
terminal on the player.
LAN cable
(not supplied)
Broadband
ADSL modem/
router
Cable modem
z
The use of a shielded and straight interface cable (LAN
cable) is recommended.
Wireless Setup (BDP-S5500/S3500
only)
Use the wireless LAN that is built into the player.
LAN cable (not supplied)
Wireless LAN
ADSL modem/
router
Cable modem
Internet
Internet
Step 3: Easy Setup
When turned on for the first time
Wait for a short while before the player turns
on and starts [Easy Initial Settings].
1
Insert two R03 (size AAA) batteries by
matching the 3 and # ends on the
batteries to the markings inside the
battery compartment of the remote.
2
Connect the supplied AC adaptor and
AC power cord (mains lead) in the
numeric order shown below. When
removing them, do so in reverse
order.
1
to DC IN 12 V
AC adaptor (supplied)
2
AC power cord (mains lead)
(supplied)
3
Press [/1 to turn on the player.
* Turns on the player, or sets to standby
mode.
3
to mains
.
*
9