Status Print - Canon imagePROGRAF iPF6400SE User Manual

iPF6400SE
*1: A rough estimate of how much ink was consumed per job is displayed. Actual ink consumption may be different. The aver-
age margin of error for estimates calculated according to Canon measurement conditions for ink costs is ±15%. Canon does
not guarantee the accuracy of these estimates. Estimates may vary depending on conditions of use. Calculation of these
estimates does not include ink consumed when cleaning printheads by forceful ejection of ink.
*2: Displayed as the menu during printing while printing is in progress.
*3: Not displayed in the regular menu.

Status Print

Status Print
You can print a Status Print report indicating the current status of the printer.
With Status Print, information is printed regarding the printer firmware version, various settings, and the status of
consumables.
Printing Status Print reports
1
Load paper.
If using cut sheets, load paper A4/Letter-sized, you will need three sheets.
2
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select Settings/Adj. tab (
• If the Tab Selection screen is not displayed, press the Menu button.
Note
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press ▲ or ▼ to select Test Print, and then press the OK button.
5
Press ▲ or ▼ to select Status Print, and then press the OK button.
Checking the information in Status Print reports
The following information is included in Status Print reports.
Canon imagePROGRAF iPFxxxx Status Print
Firm
Boot
MIT(DBF)
MIT(DB)
S/N
Date
Paper Menu
Paper Type
ManageRemainRoll
Keep Paper Type
User's Guide
).
Roll Media
Cut Sheet
Printer model
Firmware version
Boot ROM version
MIT database format version
MIT database version
Printer serial number
Indicates when the status print report was prin-
ted.
Information on the loaded paper.
Status Print
449