Yamaha FJR1300-AS Owner's Manual page 23

2. Push the "SET–" side of the cruise
control setting switch to activate
the cruise control system. Your
current traveling speed will be-
come the set cruising speed. The
cruise control setting indicator
light "SET" will come on.
TIP
When the shift
light " " is flashing, the cruise control
system cannot be activated.
1
1. Cruise control setting switch "RES+/SET–"
2. Shift down indicator light "
3. Cruise control setting indicator light "SET"
Adjusting the set cruising speed
While the cruise control system is op-
erating, push the "RES+" side of the
cruise control setting switch to in-
crease the set cruising speed or the
"SET–" side to decrease the set speed.
TIP
Pushing the setting switch once will
change the speed in increments of ap-
proximately 2.0 km/h (1.2 mi/h). Hold-
ing the "RES+" or "SET–" side of the
cruise control setting switch down will
increase or decrease the speed contin-
uously until the switch is released.
Instrument and control functions
down indicator
2 3
"
3-9
You can also manually increase your
traveling speed using the throttle. After
you have accelerated, you can set a
new cruising speed by pushing the
"SET–" side of the setting switch. If you
do not set a new cruising speed, when
you return the throttle grip, the vehicle
will decelerate to the previously set
cruising speed.
Deactivating the cruise control sys-
tem
Perform one of the following opera-
tions to cancel the set cruising speed.
The "SET" indicator light will go off.
 Turn the throttle grip past the
closed position in the deceleration
direction.
2
1. Closed position
2. Cruise control cancel direction
 Apply the front or rear brake.
 Operate the hand shift lever.
 Operate the shift pedal.
Push the power switch to turn off the
cruise control system. The "
tor light and the "SET" indicator light
will go off.
TIP
Traveling speed decreases as soon as
the cruise control system is deactivat-
ed; unless the throttle grip is turned.
3
1
" indica-