INSTRUMENT AND CONTROL FUNCTIONS
Helmet holders
3
1. Helmet holder
The helmet holders are located on the
bottom of the passenger seat.
To secure a helmet to a helmet hold-
er
1. Remove the passenger seat. (See
page 3-19.)
2. Attach the helmet to a helmet hold-
er, and then securely install the
passenger seat.
WARNING
Never ride with a helmet attached to
a helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
EAU33870
To release a helmet from a helmet
holder
Remove the passenger seat, remove
the helmet from the helmet holder, and
then install the seat.
EWA11040
Adjusting the front fork
This front fork is equipped with spring
preload adjusting bolts, rebound damp-
ing force adjusting screws and com-
pression
screws.
Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.
Spring preload
1. Spring preload adjusting bolt
To increase the spring preload and
thereby harden the suspension, turn
the adjusting bolt on each fork leg in di-
rection (a). To decrease the spring pre-
3-20
damping
force
adjusting
WARNING
EAU14741
EWA10180