Image Setup - D-Link DCS-936L User Manual

Section 3 - Configuration
This section allows you to configure the image settings for your camera.
Brightness: Adjust this setting to compensate for backlit subjects.
Saturation: This setting controls the amount of coloration, from grayscale to fully
saturated.
Contrast: Adjust this setting to alter the color intensity/strength.
Sharpness: Specify how much sharpening to apply to the image.
B/W: Select to change the video to black and white.
Mirror: Check the box to flip the image horizontally.
Flip: Check the box to flip the image vertically. If the camera is installed upside
down, Flip and Mirror should both be checked.
Frequency: Select the frequency used by your power lines to avoid camera flicker
or moving bars in your video. Generally, if your power outlets are 220 to
240 V, you should select 50 Hz. If your power outlets are 100 to 120 V, you
should select 60 Hz.
Slow Shutter: Allows you to set a slow shutter speed to use. Using a slow shutter allows
you to monitor an area in low-light conditions. However, using a slow
shutter speed may make moving objects appear blurry.
Changes made to these settings will take effect immediately.
D-Link DCS-936L User Manual

Image Setup

31