Table of Contents
Advertisement
The webpage of the device that owns the registration can be accessed by clicking
on the 'User extension' field. It is assumed that the web-server of the device uses
the standard HTTP port (port 80).
The administrator may add or delete a registration if required. However,
registration through SIP messaging is recommended. The following values need
to be provided for adding a registration.
Note: A new registration for a particular user extension cannot be added
unless a SIP user is configured with that extension.
User Extension
Contact
Priority
Expiry Time
4.4
Configuring Gateways
Gateways are used to connect DVX-1000 to external SIP based servers or the
PSTN (normal telephone) network. DVX-1000 can be connected to other SIP
servers by configuring the servers as 'INET' gateways. DVX-1000 can connect to
PSTN network through a 'PSTN' gateway or a Trunk gateway. This is not to be
confused
with
the
configuration.
The Gateway configuration information can be viewed by clicking Call Server->
Gateways. The webpage of the gateway can be accessed by clicking on the 'User
extension' field. It is assumed that the web-server of the device uses the
standard HTTP port (port 80).
To add a new gateway, click on 'Add New'. The following parameters are to be
configured.
Gateway Id
Gateway Type
Domain Name
Port
Max Calls Supported
Session Refresh Required
D-Link Confidential
Specifies the user extension for registration. For the
registration to be successfully added, the user extension
should be a configured user in SIP users.
Specifies the contact for registration. Any SIP call to the
user identified by User extension will be redirected to this
Contact value. Example: sip:9001@192.168.100.101
Specifies the priority value for the contact. Priority value
is a value between 0.0 and 1.0, with 0.0 indicating least
priority and 1.0 indicating highest priority. This is used to
prioritize between contacts if more than one contact exists
for a user extension. Refer to Q Value in SIP RFC 3261 for
more details
Specifies the expiry time for the registration. The
registration would expire after the specified expiry time.
While adding a registration, Expiry Time is specified in
seconds, whereas while displaying current registrations, it
shows the time and date at which the registration would
expire.
default
gateway
configured
A unique Gateway Id
The type of gateway. It can be INET / PSTN
Specifies the domain name / IP address of the
Gateway. This is used and the domain name/IP
Address when the call server has to register to the
gateway.
Specifies the port number that the gateway is
configured on.
Limits the number of simultaneous calls through this
gateway if a value is entered or allows unlimited
calls. If the checkbox is selected.
Refreshes the session at regular intervals. The
21
DVX-1000 User Manual
during
system
Advertisement
Table of Contents
