Panasonic MK-F500 Operating Instructions Manual page 4

 Insert the Plug firmly.
(Otherwise it may cause electric shock and fire caused by the heat that may generate around the Plug.)
 Clean the Plug regularly.
(A soiled Plug may cause insufficient insulation due to moisture, and may cause fire.)
 When abnormal operation or breaking down occurs, discontinue the appliance operation
immediately and unplug.
(It may cause smoke, fire or electric shock.)
e.g. during abnormal operation or breaking down.
• The Plug and the Cord becomes abnormally hot.
• The Cord is damaged or there has been a power failure.
• The Motor Housing is deformed or abnormally hot.
a Please unplug the appliance immediately and contact the service centre for advice or a repair.
 Make sure to hold the Plug when unplugging the Plug, i.e. never pull on the Cord.
(Otherwise it may cause electric shock, or fire caused by short circuit.)
 Be careful if hot liquid is poured into the Bowl or Blender Jug as it can be ejected out of the
appliance due to a sudden steaming.
(It may cause burning.)
 Care should be taken when handling the sharp cutting blades, emptying the Bowl or Blender
Jug and cleaning. (e.g. Knife Blade, Slicing Blades and etc.)
(It may cause injury.)
 Do not leave the appliance unattended when it is in operation.
(It may cause fire or burns.)
• When leaving the appliance unattended, turn the power off.
 Do not use the appliance in the following places:
• Any uneven surface, on non-heat resistant carpet or table cloth etc.
(It may cause fire or injury.)
• In a location where there is risk of the appliance being splashed with water, or near a heat source.
(It may cause electric shock or current leakage.)
 Do not place the appliance in the following places.
• In a location where the appliance being expose to excessive moisture, temperature or direct sunlight.
(It may cause malfunction.)
• Any high or low temperature location such as fridge, freezer, microwave or oven.
(It may cause malfunction or breakage.)
 Do not process hard ingredients (e.g. hard meat, meat with bones) or viscous material.
(It may cause malfunction.)
 Do not process more than the maximum capacity marked on each container respectively. Follow
the recommended ingredient amount for processing.
(It may cause vibration and malfunction.)
 *Do not continue operation for a long time. It is recommended to rest the appliance after a certain
operating time.
(It may cause over-heating.)
Function
Food Processor
Blender
Dry Mill
* With exception for the ingredient preparations stated.
WARNING
CAUTION
Operating Time
(minutes)
2
2
1
4
Rest Time
(minutes)
4
2
2