Confirming The Bluetooth Address Of The Printer (Bluetooth Addr); Changing The Passkey (Change Passkey/Passkey Input) - Sony UPX-C200 Operating Instructions Manual

Confirming the Bluetooth Address
of the Printer (Bluetooth ADDR)
1
1
DIGITAL PHOTO PRINTER
1
Turn on the printer.
2
Press the MENU button.
3
Press V of the control button to display "Bluetooth
SETTING[>>]."
4
Press B of the control button.
The Bluetooth address appears.
To return to Ready, press the MENU button.
24
Setting the Bluetooth Functions
2 3,4
MENU
EXEC
PRINT
ALARM
Changing the Passkey (CHANGE
PASSKEY/PASSKEY INPUT)
The same passkey is set for all cameras and printers at
the factory. If the passkey needs to be changed, set a new
passkey, following the procedures below.
Once a new passkey is set, remove the printer
registration, and register it again. Then authentication of
the new passkey will be valid.
For details on removing a printer, see "Removing a
Printer" on page 29, and on registering a printer, see
"Adding/Registering a Printer" on page 27.
Changing the passkey of the camera
1
Display the Setup display.
For details, see "Displaying the Setup Display" on
page 14.
2
Press v or V of the control button to select
Bluetooth.
3
Press ENTER of the control button.
The Bluetooth Menu display appears.
4
Press v or V of the control button to select
CHANGE PASSKEY.
5
Press ENTER of the control button.
The CHANGE PASSKEY display appears.
CHANGE PASSKEY
CURRENT KEY: 1234
NEW KEY:
OK
MOVE
6
Press b or B of the control button to select a digit
you wish to change.
7
Press v or V of the control button to set the value.
A value 0 to 9 can be used.
Repeat Steps 6 and 7 above to set a four-digit
passkey.
8
Press B of the control button to select OK.
9
Press ENTER of the control button.
EXIT
MENU
CANCEL
VALUE