Vehicle Operation - Toro UTV500AAC00000 Operator's Manual

Vehicle Operation

Pre-Start/Pre-Operation Checklist
Item
Brake System Pedal firm - near top of travel.
Fluid at proper level.
Check for fluid leaks.
Controls Steering free - no binding - no excessive free-play.
Shift lever in park.
Accelerator free - no binding - returns to idle position.
Fluids Coolant level to the bottom of the stand pipe in the radiator neck.
Check oil level.
Gas tank full of recommended gasoline.
Differential/rear drive at proper level.
Check for fluid leaks.
Suspension Ball joints/tie rod ends free - secure.
Shocks not leaking - mountings secure.
Shock spring pre-load equal on left and right.
Components free of all debris.
Lights/Switches Check headlight HI/LO beam - light switch to OFF.
Check taillight/brakelight - light switch to OFF.
Check drive select switch - set to 2WD.
Air Filter Duck bill drains clear of all debris.
Ducting secure - no holes or tears.
Tires/Wheels Properly inflated - tread adequate.
Check tires for cuts or tears.
Wheels secure to hubs - hubs secure to axles.
Check wheels for cracked or bent rims.
Seat Belts/Restraints Check condition - proper operation - proper adjustment.
Nuts/Bolts/Fasteners Check for loose nuts - bolts - tighten as necessary.
Check fasteners - latches - ROPS.
Secure hood, cargo box, seats.
18
Remarks