Safety And Instructional Decals - Toro 38472 Operator's Manual

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.
1. Cutting dismemberment, impeller and cutting
dismemberment, auger hazards—do not place your hand in
the chute; remove the ignition key and read the instructions
before servicing or performing maintenance.
1. Warning—read the Operator's Manual.
2. Cutting/dismemberment hazard, impeller—stop the engine
before leaving the machine.
3. Thrown object hazard—keep bystanders a safe distance from
the machine.
117-6047
1. Primer
2. Push the primer two times
to prime the engine.
3. Push key in to switch
engine on.
117-7713
4. Fuel spill hazard—do not tip machine forward or backward.
5. To engage the auger, squeeze the control bar.
6. Release the control bar to disengage the auger.
3
120-0149
4. Pull key to switch engine
switch off.
5. Remove key to lock
machine.
6. Read the Operator's
Manual before checking
engine oil level.