Help - Motorola AC1000 User Manual

9. Help

No dial tone
• Use only the telephone line cord supplied.
• Check that the telephone line cord is connected properly.
• Check that the mains power is connected properly and switched on.
No display
• Check that the batteries are inserted correctly and fully charged. Use only approved
rechargeable batteries supplied.
• Check that the cordless audio conferencing unit is switched on. Press and hold
• Reset the base by removing the batteries and disconnecting the mains power. Wait for
around 15 seconds before connecting it again. Allow up to one minute for the cordless
audio conferencing unit and base to synchronize.
icon flashes
• Handset is out of range. Move closer to the base.
• Make sure that the cordless audio conferencing unit is registered to the base.
• Check that the mains power is connected properly and switched on.
Keypad does not seem to work
• Check that the keypad lock is not on.
icon is not scrolling during charge
• Adjust the cordless audio conferencing unit slightly on the base.
• Clean the charging contacts with a cloth moistened with alcohol.
• Check that the mains power is connected properly and switched on.
• The battery is full. When the cordless audio conferencing unit is fully charged,
icon will appear steady on the display.
No Caller ID
• Check your subscription with your network operator.
• The caller may have withheld their number.
• The record cannot be found in your phonebook. Check that you have the correct
name / number stored in your phonebook, with the full area code.
I have forgotten my PIN!
• Remove one battery, press and hold the star button on the cordless audio
conferencing unit and replace the battery. The display shows
The cordless audio conferencing unit will automatically reset and the PIN will default
back to 0000.
Cannot register a audio conferenencing unit to the base
• You can register up to a maximum of 5 cordless audio conferencing units to a AC1000
base. You must de-register a cordless audio conferencing unit in order to register a
new one.
• Check that you have entered the correct PIN code (default = 0000).
Help
e
.
Master Reset, press OK.
35