Hands-free Mode Settings
Configure settings for using your phone without touching it, such as announcing incoming calls and
reading out messages.
1. Press
and then tap
2. Tap Hands-free mode, and then tap the ON/OFF switch beside Hands-free mode to turn the
feature On or Off.
3. After you turn the feature On, you can configure options:
Incoming call: When enabled, your phone reads out the caller's information when you
l
receive a call.
Message: When enabled, your phone reads out the sender's information when you receive
l
a message.
Alarm: When enabled, your phone reads out alarm information when an alarm sounds.
l
Calendar event info: When enabled, your phone reads out event information when a
l
reminder sounds.
Power Saving Mode Settings
Configure Power saving mode settings to conserve battery power.
1. Press
and then tap
2. Tap Power saving mode to configure options:
Tap the ON/OFF switch next to Power saving mode to turn the mode On or Off. Power
l
saving mode must be turned On to configure settings.
CPU performance: When enabled, the maximum performance of the device's CPU
l
(Central Processing Unit) is disabled to conserve battery power. Tap the check box beside
the option to enable or disable it.
Screen output: When enabled, the frame refresh rate and brightness level are reduced to
l
conserve power. Tap the check box beside the option to enable or disable it.
Disable haptic feedback: When enabled, Haptic feedback is disabled to conserve battery
l
power. Tap the check box beside the option to enable or disable it.
Note: Tap Learn about Power saving mode to view information about these settings.
Settings
> Settings > My device.
> Settings > My device.
131