Positioning The Deluxe Seat - Toro 31230 Operator's Manual

Figure 14
1. Back rest knob
2. Seat suspension knob
2. Slide the seat to the desired position and release lever
to lock in position.
3. Verify that the seat has locked into place by attempting
to move it back and forth.
Changing the Seat Suspension
The seat can be adjusted to provide a smooth and comfortable
ride. Position the seat where you are most comfortable.
Without sitting on the seat, turn the knob in front either
direction to provide the best comfort
Figure 15
1. Seat suspension knob
Changing the Back Position
The back of the seat can be adjusted to provide a comfortable
ride. Position the back of the seat where it is most
comfortable.
To adjust it, turn the knob, under the right-side arm rest, in
either direction to provide the best comfort
3. Lumbar support
adjustment knob
4. Seat position adjustment
lever
(Figure 14).
2. Operator weight setting
(Figure 14).
Changing the Lumbar Support
The back of the seat can be adjusted to provide a customized
lumbar support for your lower back.
To adjust it, turn the knob, under the left-side arm rest, in
either direction to provide the best comfort

Positioning the Deluxe Seat

1. Fore/Aft adjustment lever
2. Weight adjustment lever
3. Backrest locking lever
Changing the Weight Adjustment
The seat can be adjusted to provide a smooth and comfortable
ride.
Important: To adjust the seat for the drivers weight the
driver must be seated and the ignition key moved to the
On position.
The seat is adjusted for the driver's weight by pulling or
pressing the weight adjustment lever
The driver's weight is adjusted correctly when the arrow is in
the middle clear area of the viewing window.
Within this viewing area, the seat can be adjusted to a
minimum spring movement.
When the minimum/maximum weight adjustment has been
reached, you can hear it reaching the upper or lower end stop.
Important: To prevent injury to the operator and/or
damage to the machine, the setting for the driver's
weight and the seat must be checked and adjusted
before the machine is operated.
Note: To avoid compressor damage during weight
adjustment, the compressor must be operated no longer than
1 minute.
20
(Figure
Figure 16
4. Armrest adjustment knob
5. Lumbar support adjusting
knob
(Figure 16).
14).