4
. Check whether the applicable temperature limit operation group has been created in 'Group'. Now
select the unit to include in the group from the right unit list, and click on the [ ] button to include
the units.
Check whether auto
change over operation
group is created
5
. Click on the [Save] button to save the current setting. 'Information' screen to confirm saving is
displayed. Click on [Yes] button.
After clicking on [Save]
button, when the
'Information' screen is
displayed, click on [Yes]
button
After selecting the unit from the list, click
on the [ ] button to include the unit to
the temperature limit operation group
Installation/Owner's Manual
4. Operating AC Smart
4-71