Samsung GALAXY NOTE EDGE User Manual page 76

Wi-Fi Settings
The Wi-Fi settings menu allows you to set up many
of your device's advanced Wi-Fi services.
1. From a Home screen, tap
Settings.
2. Tap Wi-Fi, and then tap ON/OFF to turn Wi-Fi on.
More options for options:
3. Tap
•
Scan: Start another scan for nearby Wi-Fi
networks.
•
Wi-Fi Direct: Configure a Wi-Fi Direct
connection with a nearby device.
•
Advanced:
-
Network notification: Receive a notification
when new Wireless Access Points (WAPs)
are available.
-
Passpoint: Connect to passpoint-enabled
Wi-Fi Access Points automatically.
-
Sort by: Sort Wi-Fi networks by Alphabet or
Signal strength.
-
Keep Wi-Fi on during sleep: Specify when
to disconnect from Wi-Fi.
-
Always allow scanning: Allow Google
location service and other apps to scan for
networks, even when Wi-Fi is turned off.
-
Smart network switch: Automatically switch
between mobile data and Wi-Fi to maintain a
stable Internet connection.
-
Install certificates: Install authentication
certificates.
-
MAC address: View your device's
MAC address, which is required when
connecting to some secured networks (not
configurable).
-
IP address: View your device's IP address
(not configurable).
•
WPS push button: Set up a connection to a
WPS (Wi-Fi Protected Setup) router or other
equipment.
Settings
Apps >
70
•
WPS PIN entry: View the PIN used by your
device to set up a PIN-secured connection
to a Wi-Fi router or other equipment (not
configurable).
•
Share Wi-Fi profile: Share Wi-Fi profiles you
have created with others.
•
Help: Learn about setting up and using Wi-Fi
networks, and other settings.
Wi-Fi Direct
Wi-Fi Direct allows direct device-to-device
connections via Wi-Fi, without having to connect to a
Wi-Fi network.
1. From a Home screen, tap
Settings.
2. Tap Wi-Fi, and then tap ON/OFF to turn Wi-Fi on.
Wi-Fi must be on to configure settings.
3. Tap More options > Wi-Fi Direct. Your device
automatically scans for nearby Wi-Fi Direct
devices or you can tap Scan to start scanning.
4. After scanning for devices, select a device,
and then follow the prompts to complete the
connection.
•
Tap More options > Multi connect to scan
for devices that support multi connect. Select
the devices and follow the prompts to establish
the connections.
•
To rename your device (as seen by other
devices), tap More options > Rename
device.
Wi-Fi Direct Status Indicator
Displays in the status bar when connected
to another device using Wi-Fi Direct.
Apps >
Wi-Fi and Wi-Fi Direct