Sony HAP-S1 User Manual page 107

Resetting the product (performing the Factory Reset function)
Displaying an alert message to notify the user of an operational error
Setting the Network Standby function (Network Standby)
When you set the Network Standby function to [On], you can start up or operate the HDD
AUDIO PLAYER via the network even when the HDD AUDIO PLAYER is in standby mode.
1. Select [Settings] - [System Settings] in the Home screen.
2. Select [Network Standby].
3. Select [On].
Descriptions of menu settings
Selectable menu items are described below.
On:
The HDD AUDIO PLAYER is connected to the network at all times, even when the unit is
turned off. This allows you to start up or operate the HDD AUDIO PLAYER from the HAP Music
Transfer or HDD Audio Remote application. This mode also reduces the startup time of the
HDD AUDIO PLAYER.
Off:
The power consumption is lower than when the Network Standby function is set to [On], but the
startup time when the HDD AUDIO PLAYER is turned on is longer (factory default setting).
Setting the Auto Standby function (Auto Standby)
If you set the Auto Standby function to [On], if you do not operate the HDD AUDIO PLAYER
and do not play tracks for approximately 20 minutes, the unit is automatically turned off and
enters standby mode to reduce the power consumption.
1. Select [Settings] - [System Settings].
2. Select [Auto Standby].
3. Select [On] (factory default setting).