Panasonic DMC-FX36 Operating Instructions Manual page 111

With a calendar search, pictures are displayed on dates differing from the actual
dates on which the pictures were taken.
• Is the clock in the camera set properly? (P15)
•
When pictures edited using a PC or pictures taken by other equipment are searched, they may
be displayed on dates differing from the actual dates on which the pictures were taken.
White round spots like soap bubbles appear on the recorded picture.
•
If you take a picture with the flash in a dark place or indoors, white
round spots may appear on the picture caused by the flash reflecting of
particles of dust in the air. This is not a malfunction.
A characteristic of this is that the number of round spots and their
position differ in every picture.
[THUMBNAIL IS DISPLAYED] appears on the screen.
•
Is it a picture that has been recorded with other equipment? In such cases, these pictures may
be displayed with a deteriorated picture quality.
A clicking sound is recorded in the motion pictures.
•
This unit automatically adjusts the aperture during motion picture recording. At such times, a clicking
sound is heard, and this sound may be recorded on the motion pictures. This is not a malfunction.
The picture does not appear on the television.
•
Is the camera connected to the TV correctly?
> Set the TV input to external input mode.
•
Output from the [COMPONENT OUT] socket is not possible when it is connected to the PC or
the printer.
> Connect it only to the TV.
The display areas on the TV screen and the camera's LCD monitor are different.
• Depending on the TV model, the pictures may be extended horizontally or vertically or they may
be displayed with their edges cut off.
The motion pictures cannot be played back on a TV.
•
Are you trying to play back the motion pictures by directly inserting the card in the card slot of the TV?
> Connect the camera to the TV with the AV cable (supplied), or with the component cable
(DMW-HDC2; optional), and then play back the motion pictures on the camera. (P95, 96)
The picture is not displayed fully on the TV.
> Check [TV ASPECT] setting. (P22)
TV, PC and printer
Others
111
VQT1P28