Nokia RX-44 Service Manual page 58

6. Press Next button. Phoenix starts to scan devices.
7. Phoenix shows what connections can be made after scanning. Press Next button.
8. Choose Nokia Flash Programming Device you are using from the list. Select NFPD USB (FBUS), if the
prommer is connected to your PC via USB cable. Select NFPD TCP (serial number), if the prommer is
connected to your PC via TCP / IP. Check the serial number from the prommer's label.
9. Click Finish to complete the configuration of the connection.
10. Press Manual Setup button, if you want to create a connection manually.
11. Enter IP address and serial number of the prommer to the parameters, if you want to use NFPD TCP
connection.
Page 3 –18 COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Service Software Instructions
RX-44
Issue 1