Initial Setup
When you first turn on or reset the TV, the Initial
Setup window will appear.
1
In the Menu Language field, press
select your preferred language.
2
to select Time Zone Setup and set
Press
or
your desired time zone with
and press
.
3
Next, the Location setting window will appear.
For normal home use, press
Home and press
.
4
Next, ANT/CABLE In setup window will appear.
Press
or
to select the input source (Cable or
Antenna) for the ANT/CABLE input on the TV.
5
If you select Antenna, the Channel Tuning Mode
setup window will appear. To tune only digital
channels, select Digital. To tune digital channels
preferentially over analog when entering channel
number directly, select Auto. For normal tuning,
select Standard. Press
Tuning.
6
to select Start Scan and continue with
Press
the Auto Tuning.
You can stop the Initial Setup with
you do not finish the entire Initial Setup process, the
Initial Setup window will appear every time you turn
on the TV.
Selecting the menu language
You can choose from three different languages
(English, French, and Spanish) for the on-screen
display of menus and messages.
To select the menu language:
1
and open the Preferences menu,
Press
highlight Menu Language.
2
Press
or
to select your preferred menu
language.
3
Press
to close the Preferences menu.
Chapter 5: Setting up your TV
or
to
or
or
to select
to continue to Auto
. However if
Configuring the antenna input
source for the ANT/CABLE terminal
To configure the ANT/CABLE input source:
1
Press
and open the Setup menu.
2
Highlight Installation and press
3
A new set of Installation menu icons will appear,
as shown below. Open the Terrestrial menu,
highlight Input Configuration, and press
4
Highlight ANT/CABLE In and press
select the input source (Cable or Antenna) for the
ANT/CABLE input on the TV.
5
To save your new settings, highlight Done and press
. To revert to your original settings, highlight
Cancel and press
.
.
.
or
to
(continued)
25