Samsung 6 SERIES User Manual page 42

When selecting the Cable TV system: Press the
ENTER
[31
button to start the auto program.
Press the
A,
Y,
~
or
~
to select the correct analog
signal cable system source among I'STD", llHRC",
and llIRC". Press the A or Y button to select "Start",
then press the
ENTER~
button. If you have Digital
cable TV, select the cable system signal source for
both Analog and Digital.
The TV begins memorizing all available stations.
Press the EXIT button to exit.
an 0
enus
e
Press the POWERe> button on the remote control.
You can also use the POWERe> button on the TV.
Viewi 9 the
Press the A or • button to select "Auto Program",
then press the ENTER
~
button.
After all the available channe s are stored, it
starts to remove scrambled channels. The Auto
program menu then reappears.
e
ory
With the power on, press the MENU button.
The main menu appears on the screen.
The menu's left side has icons: Picture, Sound,
Channel, Setup, Input, Support.
Press the A or Y button to select one of the icons.
Then press the ENTER
~
button to access the
icon's sub-menu. Press the EXIT button to exit.
The on-screen menus disappear from the
screen after about one minute.
Press the MENU button to display the menu.
Press the A or Y button to select "Channel", then
press the ENTER ~ button.
Press the A or • button to select the antenna
connection, then press the ENTER ~ button.
oring C an els in
utomat·c et od)
To Stop the uto Program Fu ction
Press the MENU button while the Auto Program function is
being executed. You can also press the ENTER ~ button
to stop the setup.
Checking to see if Channels were Stored in emory
Press the CH button. Only the channels stored in memory
will be selected (in order).
e antennas
• Air: "Air" antenna signal.
• Cable: "Cable" antenna signal.
• Auto: "Air" and llCable" antenna signals.
English-8