Panasonic KX-NS1000 Getting Started page 40

4.3.1 Assigning IP Addressing Information
KX-NT300 series (except KX-NT321)
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Select "Network".
IP Address*
To set the subnet mask address
Select "Subnet Mask".
To set the default gateway address (if required)
Select "Default Gateway".
To enter the IP address of the Secondary PBX (optional for software version 2.00 or
later only)
Return to the
Menu screen.
ENTER
To end programming
Return to the
Menu screen.
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
40 Getting Started
Press "SETUP" when it is displayed.
ENTER Select "Disable"
for DHCP setting.
1
ENTER
Subnet Mask Address*
ENTER
ENTER
Select "PBX".
ENTER
PBX IP Address
STORE
Press "STORE".
SETUP
Select "IP Address".
2
Default Gateway Address*
Select "PBX IP
Address".
ENTER
The IP-PT will reboot
and can then be
registered to the PBX.
ENTER
ENTER
3
ENTER
ENTER Select "Secondary
PBX".