DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Figure 45. Configuring 3G WAN connection. The expert settings mode. The PPP section.
Parameter
Connection name
Mode
Username
Without authorization
Password
Password confirmation
APN
Dial number
Authentication
algorithm
MTU
A name for connection for easier identification.
The value of the field specifies the type of the network to which the
router connects. Leave the auto value to let the router connect
automatically to an available type of network, or select a needed
value from the drop-down list. For GSM USB modems only.
PPP
A username (login) to connect to the network of the operator.
Select the checkbox if your operator does not require authorization.
A password to connect to the network of the operator.
The confirmation of the entered password (to avoid mistypes).
An access point name. For GSM USB modems only.
A number dialed to connect to the authorization server of the
operator.
Select a required authentication method from the drop-down list or
leave the AUTO value.
The maximum size of units transmitted by the interface. Optional.
Page 64 of 174
Configuring via Web-based Interface
Description