Ending The Conference; Disconnecting The Line; Mode - Sony PCS-G70 Operation Manual

Ending the Conference

Disconnecting the Line

1
Press the CONNECT/DISCONNECT (
Commander.
The message "Disconnect?" appears on the monitor screen.
2
Press the
press the PUSH ENTER button, or press the CONNECT/DISCONNECT
/
(
The line is disconnected and the launcher menu is restored.
Setting the System to Standby Mode
1
Press the
The message "Power Off?" appears on the monitor screen.
B or b button on the Remote Commander to select "OK", then
) button.
@ / 1 button on the Remote Commander.
/
) button on the Remote
Ending the Conference
13
GB