Samsung 3 SERIES User Manual page 65

Connecting a VCR
Video Connection
TV Rear Panel
VCR Rear Panel
[§]
Audio Cable (Not supplied)
~
Video Cable (Not supplied)
[1]
RF Cable (Not supplied)
Follow the Instructions In Viewing a VCR or Camcorder Tape
I
to view your VCR tape.
Each VCR has a different back panel configuration
When connecting a VCR match the color of the connection terminal to the cable
S-Video Connection
TV Rear Panel
VCR Rear Panel
[1]
Audio Cable (Not supplied)
~
S·Video Cable (Not supplied)
[1]
RF Cable (Not supplied)
English-5
Unplug the cable or antenna
from the back of the TV.
Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
Connect an RF Cable between
the ANT OUT terminal on the
VCR and the ANT IN terminal
on the TV.
Connect a Video Cable between
the VIDEO OUT jack on the
VCR and the AV IN [VIDEO] jack
on the TV.
Connect Audio Cables between
the AUDIO OUT jacks on the
VCR and the AV IN [R-AUDIO-L]
jacks on the TV.
If you have a mono (non-stereo)
VCR use a Y-connector (not
supplied) to hook up to the right
and left audiO Input Jacks of the
TV. If your VCR
IS
stereo you
must connect two cables.
To begin, follow steps 1-3 in
the previous section to connect
the antenna or cable to your
VCR and your TV.
Connect an S-Video Cable
between the S-VIDEO OUT jack
on the VCR and the AV IN
[S-VIDEO] jack on the TV.
I!I
Connect Audio Cables between
iii
the AUDIO OUT jacks on the
VCR and the AV IN [R-AUDIO-L]
jacks on the TV.
An S-Vldeo caole may be Included
With a VCR (If not check your local
electronics store)
Each VCR has a different back
panel configuration
When connecting a VCR. match
the color of the connection
terminal to the cable.