2.3 Installing the Option Units
2.3 Installing the Option Units
Slot Condition
Install the power supply unit (PSU) into the left-most slot, and optional service cards into free slots.
KX-TDA100
A
B
A PSU Slot
B Null Slot
*1
C Free Slots 1 to 6 for Optional Service Cards
D PSU Slot
E Free Slots 1 to 11 for Optional Service Cards
Null slot is not available for any optional service card.
*1
CAUTION
To protect the back board from static electricity, do not touch parts on the back board in the main unit,
PSU, and on the optional service cards. To discharge static electricity, touch ground or wear an earthing
strap. Make sure the screws are tightened to earth the card securely.
Installing the Power Supply Unit
1.
Insert the PSU along the guide rails.
2.
Push the release lever in the direction of the arrow, so that the PSU engages securely with the connector
on the back board.
12
Getting Started
C
KX-TDA200
D
E