Extender Setup - D-Link DCS-5025L User Manual

Section 3 - Configuration
This section allows you to setup and configure the Extender Mode feature of your camera. Extender Mode allows your camera
to extend the range of your existing wireless network by repeating the signal it receives. You can choose to use the same
network name and settings as your existing wireless network, or you can create a new one.
Enable Check this box to enable Extender Mode.
Extender
Mode:
Host Wireless This shows the name of the Host wireless network that the
Network camera is connected to and will extend.
Name:
Extended Select an option:
• Same as Host Wireless Network Name: Your extended
Wireless
Network network will use the same name and settings as your
Name (SSID): Host network. Your devices can use the same wireless
information to connect to both the Host and Extended
networks.
• Create a New Wireless Network Name: This allows
you to manually set the name and security used for the
extended network. You will need to add this information
for each wireless device that connects to this Extended
network.
Maximum
Set the maximum number of clients that are allowed to connect
Clients
to the extended network.
Allowed to
Connect:
D-Link DCS-5025L User Manual

Extender Setup

35 35