Panasonic KX-TDA30 Features Manual page 170

1.16 Optional Device Features
→ [732] DISA Security Mode
The features available depend on the preprogrammed DISA security mode as follows:
Security Mode
All Security
Trunk Security
No Security
: Available
* If trunk call is available, Account Code Entry (→ 1.5.4.3 Account Code Entry) is also available.
:
Note
DISA AA service and Operator Call (→ 2.2.5 Operator Features) are available for any security mode.
Security Mode Override by Verification Code Entry
If the caller performs Verification Code Entry (→ 1.8.6 Verification Code Entry) while hearing a DISA
message, the security mode can be temporarily changed to No Security mode.
Entry method:
Verification Code Entry feature number +
After changing mode, the new mode remains in force for the duration of the call.
DISA Intercept Routing—Busy/DND
If the destination called by the outside party is busy or in DND mode, and if (1) the busy destination does
not set Call Waiting, FWD, or Idle Extension Hunting or (2) the destination is in DND mode and Idle
Extension Hunting is not available, one of the following can be selected through system programming:
a)
Busy Tone: Busy tone is sent to the caller.
b)
Intercept Routing: Intercept Routing—Busy/DND will work and the call will be redirected to the
preprogrammed destination.
c)
Outgoing Message (OGM): An outgoing message (OGM) will be sent to the caller. The message
for busy/DND mode can be assigned for each outgoing message (OGM) which has a DISA floating
extension number.
DISA Intercept Routing—No Answer
If a destination is not available to answer a DISA call within a preprogrammed time period (DISA Intercept
time) after the call is reached, the call will be redirected to the programmed destination by the Intercept
feature.
If the intercept destination is not available to answer the call within a preprogrammed time period (DISA
Disconnect Time after Intercept) after the DISA Intercept time expires, the call will be disconnected.
→ [604] Extension Intercept Destination
Walking COS Through DISA
If the caller performs Walking COS (extension number and PIN entry) while hearing a DISA message, the
security mode can be temporarily changed to No Security mode (→ 1.8.5 Walking COS). After performing
Walking COS, the following features are available, using the settings of the specified extension:
170 Feature Guide
Intercom
Call
Without PBX Code
+ verification code + verification code PIN
TIE Line Call
With PBX Code
Trunk Call
*