Specifications - Sony AC-DN10 Operation Manual

Specifications

General
Voltage source
100-240V AC, 50/60 Hz
Current drain
168 VA or less
Peak inrush current
(1) Power ON, current
probe method: 20 A
(100 V)/60 A (240 V)
(2) Hot switching inrush
current, measured in
accordance with
European standard
EN55103-1: 25 A (230
V)
Operating temperature
0°C to 45°C
(32°F to 113°F)
Mass Approx. 850 g (1 lb 14
oz)
Dimensions 101 × 169 × 48 mm
3
(4 × 6 /
4
(w/h/d) (excluding
projecting parts)
Input/output
Current input (AC)
144 VA or less (on
regulation)
Power output (DC)
100 W at maximum
Voltage output (DC)
16.7 V
Current output (DC)
6 A at maximum
DC output connector
Square-shaped 5-pin
connector
XLR-type 4-pin
connector
16.7 V, 6 A
15
× 1 / inches)
16
Battery charging connector (DC)
Square-shaped 5-pin
connector 16.8 V,
5 A/3 A
Supplied accessories
Operation Manual (1)
AC power cord (angle type) (1)
Optional accessory
DC power cord
Design and specifications are subject
to change without notice.
Note
Always verify that the unit is
operating properly before use.
SONY WILL NOT BE LIABLE
FOR DAMAGES OF ANY KIND
INCLUDING, BUT NOT LIMITED
TO, COMPENSATION OR
REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF
PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF
THIS UNIT, EITHER DURING
THE WARRANTY PERIOD OR
AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY
OTHER REASON
WHATSOEVER.
15 (E)