Declaration Of Conformity - Bosch BBQ fan Original Instructions Manual

OBJ_BUCH-1771-002.book Page 17 Friday, December 12, 2014 9:35 AM

Declaration of Conformity

We declare under our sole responsibility that the product described un-
der "Technical Data" complies with all applicable provisions of the direc-
tive 2006/42/EC including its amendments.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 12.12.2014
Assembly
Attaching the Hand Strap (see figure A)
The hand strap 5 is used to secure the screwdriver with BBQ fan to your
wrist. This prevents the screwdriver with BBQ fan from accidentally falling
into the barbecue.
– Thread the thin end of the hand strap 5 through the eyelet of the screw-
driver.
– Guide the carrying strap through the thin loop and tighten the hand
strap.
Attaching Nozzle (see figure B)
– Mount the nozzle 1 onto the BBQ fan 2.
The detent 6 must be heard to engage.
Mounting the BBQ Fan (see figures C–D)
– Before mounting the BBQ fan 2, the rubber cap 7 of the screwdriver
must be pulled off toward the front.
– Afterwards, mount the BBQ fan onto the screwdriver.
The BBQ fan must be heard to engage.
Bosch Power Tools
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
1 609 92A 10K | (12.12.14)
English | 17